Answered Questions

  • 1
    Answered

    Black oxide concentrate

    Mirko Tmusic · 2 · Last reply by Clare

    Dear Sirs,

    Do you have and do you ship black oxide concentrate to Wien,Austria or Belgarde,Serbia. I would like to order 1Pint of B.O.Concentrate (Saw the price of 28.99$ on Caswell US site).

    What would be the conditions?

    Thank you.

    mocapartizan@yahoo.com

  • 1
    Answered

    Sample Request

    Laura Graham · 2 · Last reply by Clare

    Hi there,

    Is it possible to receive a yellow chromate sample please?

    It is for a retail job based in London, and we need this urgently to present the idea to a client.

    Can the sample be sent to:

    FAO Laura Graham

    Dalziel & Pow

    5-8 Hardwick Street

    London 

    EC1R 4RG

    Thanks,

    Laura

  • 1
    Answered

    light rust in tank before using the tank sealer

    Steve · 1 · Last reply by David Wise

    I will be using the Caswell fuel tank sealer soon, this will be used on my BSA Rocket 3 fuel tank. My concern is the tank as a light coating of surface rust in the tank which as been causing problems blocking the carbs, the surface rust is powdery. I.e. If i run my finger through through the fuller hole i will end with my finger coated with a fine rust powder, i don't think this will flush off the inside of the tank.

    Really appreciated any recommendations if i should use a product before using the sealer.

    Thanks, Steve

  • 1
    Answered

    fuel tank sealant

    Mike · 1 · Last reply by David Wise

    Do you have a sealant kit suitable for a 70s fibreglass tank that is used for Castor R oil pre-mix at 20:1 with super unleaded petrol. It is a 1.2 US gallon tank (approx. 5 litres?).

  • 1
    Answered

    Hi I want to seal an integral tank on a racing powerboat which runs on standard pumped fuel 97 / 99 Octane. The tank is formed of carbon fibre and measures c 60 litres in size. Whilst I do not have the exact measurements to hand it is roughly 90 cms x 90

    The Palfs · 2 · Last reply by The Palfs

    Hi I want to seal an integral tank on a racing powerboat which runs on standard pumped fuel 97 / 99  Octane. The tank is formed of carbon fibre and measures c 60 litres in size. Whilst I do not have the  exact measurements to hand it is roughly 90 cms x 90 cms x 75 cms. Obviously this will need to be   painted on so my query is will the product be suitable and if so will I require more than 1 pack.

    Many thanks

    Graham

  • 1
    Answered

    Plating Brass on Pewter?

    Mail · 1 · Last reply by Clare

    Would the Plug 'n Plate system work for plating brass onto pewter, which is mostly tin? If so, is it likely to be back in stock soon? Thank you.

  • 1
    Answered

    Duracoat

    Jake Duncan · 3 · Last reply by Clare

    Hi I emailed a few months ago about your stocking of duracoat, I was told your company was looking toStart your own brand of duracoat I was wondering    When this would be available 

  • 1
    Answered

    Nickel anode dimension

    hardianto · 1 · Last reply by Clare

    Dear Sir/madam,

    I have read your product "Nickel anode" and its weight is 1 kg. What is the dimension?

    Do you have Nickel anode with 6" x 8" dimension or less? I need it for my PhD work.

    What is the purity of this product?

    Thank you

    Kind regards

    Hardianto

  • 1
    Answered

    Hi. What courier company are you using for sending your products to Romania. Thanks

    Cristi Balan2002 · 1 · Last reply by David Wise

    Hi

    What courier company are you using for sending your products to Romania.

    Thanks

  • 1
    Answered

    GTS1750 small area

    johnd · 0 · Posted

    Hi, I have a lightly rusted tank only at the top, can I paint GTS1750 on to a small area

  • 1
    Answered

    DUPLI-COLOR SHADOW KIT

    John · 0 · Posted

    Can I spray on top of chrome plated alloy, steel and plastic with the two can kit. I want to shadow chrome the centre speedo clock consul and the rear seat support brackets on a motorcycle they are polished chromed already.. Can I do this with the Dupli-color Shadow kit. If I can what do you recommend to prepare the surface.

  • 1
    Answered

    GTS 1750 Water/Methanol resistance

    Tim · 0 · Posted

    Hi 

    I have just built a custom Aluminium Water/Methanol tank and need to protect the Aluminium from the 50/50 Water/Methanol mix. Is the GTS 1750 suitable for my requirements.

    Regards Tim

  • 1
    Answered

    Dupli color trunk paint

    Les Clark · 1 · Last reply by David Wise

    Can you please let me know if you have any, or if you can get any Black/Aqua trunk spatter paint.

    Thanks

    Les

     

  • 0
    Answered

    A placed order .

    Peter Hunter · 2 · Last reply by Peter Hunter

    Hi, i have placed a order for some of your products [ order  #2489.] and if i may ask ;- do any need anything else with these as i wish to re coat some parts of my antique clocks ie;- silver and brass etc?

    Many thanks,

    Peter.

  • 1
    Answered
  • 1
    Answered

    OD green duracoat

    Jake Duncan · 1 · Last reply by David Wise

    just been in the uk site and I'm just wondering when the OD green duracoat refill is back on stock 

  • 1
    Answered

    Caustic sensitivity

    Mueller · 1 · Last reply by Clare

    We coated a plastic part with the Copper Conductive Paint, Before plating the part was activated in 10% caustic. We observed a damaging of the copper coating. Is the Copper Conductive Paint sensitive to caustic?

  • 1
    Answered

    newby help

    peter · 1 · Last reply by Clare

    New to blackening plating etc so apologies for terminology etc . i was to blacken O1 (tool steel) steel , has to be at room temperature . Recommended kits etc would be a huge help and any hints and tips to getting a uniform colour . Many thanks , Peter

  • 1
    Answered

    Schwung Home - product for brass blacken

    Dear Sir/Madame I am writting from Schwung Home company. We are lighting manufacturer from Poland but we operate in US as well. Recently, we launched brass lighting collection. Currently, we are looking for new brass finish.

    Your US team recommended us to use:

    http://www.caswellplating.com/metal-finishing-solutions/antiquing-solutions/black-brown-oxidizer-16-fl-oz.html

    Can I please receive the technical sheet and the product sample?

    Thank you

    Kind regards,

    Angelika Jedraszczyk

  • 0
    Answered